OneTouch ™ AT Network Assistant

General
Dimensions (with module and battery installed)	10.3 in x 5.3 in x 2.9 in (26.2 cm x 13.5 cm x 7.3 cm)
Weight (with module and battery installed)	3.5 lb (1.6 kg)
Display	5.7 in (14.5 cm) LCD with projected capacitance touchscreen, 480 x 640 pixels
AC adapter	Input: 100-240 Vac, 50-60 Hz, 1.0 A Output: +15 Vdc, 2.0 A
Battery type	Lithium ion battery pack, 7.2 V
Battery life	Approximately 3-4 hours depending on type of usage 4 hours to charge from 10% capacity to 90% capacity with the unit powered off
Memory	Internal: 2 GB shared between system and user files SD card: 4 GB, brand and model selected for optimal performance USB 2.0 type A port: for use with USB mass storage devices

Network ports
Network analysis ports	Two RJ-45 10/100/1000BASE-T Ethernet Two Small Form-factor Pluggable (SFP) 100BASE-FX/1000BASE-X Ethernet
Management port	One RJ-45 10/100BASE-T Ethernet
Supported network standards	IEEE 10BASE-T, IEEE 100BASE-T, IEEE 1000BASE-T, IEEE 100BASE-FX, IEEE 1000BASE-X
RFCs and standard MIBs used	1213, 1231, 1239, 1285, 1493, 1512, 1513, 1643, 1757, 1759, 2021, 2108, 2115, 2127, 2233, 2495, 2515, 2558, 2618, 2737, 2790, 2819, 3592, 3895, 3896, 4188, 4502.
Not for connection to telephone networks	The OneTouch AT analyzer is NOT designed for connection to a telephone network. The OneTouch AT analyzer is NOT designed for connection to an ISDN line. Do not connect to a telephone network or ISDN line except through a regulatory agency compliant computer network modem device.

Wi-Fi Adapter
Data rate	802.11a: 6/9/12/24/36/48/54 Mbps 802.11b: 1/2/5.5/11 Mbps 802.11g: 6/9/12/24/36/48/54 Mbps 802.11n (20 MHz): MCS0-23, up to 216 Mbps 802.11n (40 MHz): MCS0-23, up to 450 Mbps
Operating frequency	2.412 ~ 2.484 GHz (Industrial Scientific Medical Band) 5.170 ~ 5.825 GHz
Security	64/128-Bit WEP Key, WPA, WPA2, 802.1X
Transmit output power (±2 dBm tolerance, maximum power will vary by channel and according to individual country regulations)	802.11a: 12 dBm ± 2 dBm @ 54 Mbps 802.11b: 17 dBm ± 2 dBm @ 11 Mbps 802.11g: 16 dBm ± 2 dBm @ 54 Mbps 802.11gn HT20: 16 dBm ± 2 dBm @ MCS0 802.11gn HT20: 15 dBm ± 2 dBm @ MCS7 802.11gn HT40: 15 dBm ± 2 dBm @ MCS0 802.11gn HT40: 14 dBm ± 2 dBm @ MCS7 802.11an HT20: 15 dBm ± 2 dBm @ MCS0 802.11an HT20: 12 dBm ± 2 dBm @ MCS7 802.11an HT40: 14 dBm ± 2 dBm @ MCS0 802.11an HT40: 11 dBm ± 2 dBm @ MCS7
Receive sensitivity (±2 dBm tolerance)	802.11a: -81 dBm ± 2 dBm @ 54 Mbps 802.11b: -92 dBm ± 2 dBm @ 11 Mbps 802.11g: -82 dBm ± 2 dBm @ 54 Mbps 802.11gn HT20: -79 dBm ± 2 dBm @ MCS7 802.11gn HT40: -76 dBm ± 2 dBm @ MCS7 802.11an HT20: -78 dBm ± 2 dBm @ MCS7 802.11an HT40: -74 dBm ± 2 dBm @ MCS7
Power consumption (typical)	Transmit: 80 mA Receive: 350 mA

Wi-Fi Antennas
Internal Wi-Fi antennas	Three internal 2.4 GHz, 1.1 dBi peak, 5 GHz, 3.2 dBi peak antennas
External directional antenna	Antenna, frequency range 2.4 - 2.5 and 4.9 - 5.9 GHz. Minimum gain 5.0 dBi peak in the 2.4 GHz band, and 7.0 dBi peak in the 5 GHz band.
External antenna connector (external antenna port is receive-only, no transmit)	Reverse SMA

Environmental and regulatory
Operating temperature	32°F to 122°F (0°C to 50°C)
Battery charging temperature	32°F to 104°F (0°C to 40°C)
Storage temperature	-40°F to 160°F (-40°C to 71°C) -4°F to 122°F (-20°C to 50°C) for periods longer than 1 week
Operating relative humidity (% RH without condensation)	5% to 45% at 32°F to 122°F (0°C to 50°C) 5% to 75% at 32°F to 104°F (0°C to 40°C) 5% to 95% at 32°F to 86°F (0°C to 30°C)
Shock and vibration	Meets the requirements of MIL-PRF-28800F for Class 3 Equipment
Safety	CAN/CSA-C22.2 No. 61010-1-04, IEC 61010-1:2001
Operating altitude	13,123 ft (4,000 m), 10,500 ft (3,200 m) with ac adapter
Storage altitude	39,370 ft (12,000 m)
Pollution degree	2
EMC	EN 61326-1:2006

Cables
Cable types	100 Ω Unshielded Twisted Pair (UTP) LAN cables. 100 Ω Shielded or Screened Twisted Pair (SeTP) LAN cables. TIA Category 3, 4, 5, 5e, and 6. ISO Class C, D, E and F.
Cable length measurement	Measurable cable lengths are from 3 feet (1 meter) to 656 feet (200 meters). Accuracy: ± 6 feet (± 2 meters) or 5%, whichever is greater. Length measurement is based on Nominal Velocity of Propagation (NVP) for CAT 5e cable.

Settings
Wired	Speed, duplex, PoE, 802.1X, IPv4 address, IPv6 address, MAC address (port A can be changed by the user), VLAN
Wi-Fi	Band (2.4 and/or 5 GHz), authorization default, scan or connect, SSID, security, IPv4 address, IPv6 address, MAC address (Wi-Fi adapter can be changed by the user)
SNMP	v1, v2, v3
Management port	IPv4 address
Language (user interface)	Chinese (simplified), English, French, German, Japanese, Portuguese, Russian, Spanish

Network Tests
Infrastructure	OneTouch instrument, cable, PoE, Wi-Fi analysis, nearest switch, Wi-Fi connect, gateway, DHCP server, DNS server, discovery
Services	Ping (ICMP), connect (TCP), Veri-Fi™, web (HTTP), file (FTP), multicast (IGMP), video (RTSP), email (SMTP)

Testing Tools
Capture	Connection (port A, A and B, inline) Filter (MAC, VLAN,IP address, port, IPv6) File size (1 MB to 2 GB) Frame slice size (64 B to 1518 B) Inline speed/duplex (10/100/1000 Mbps, half/full)
Browser	Full/mobile, proxy on/off
Telnet/SSH	Username/password (for SSH)
Toner	IntelliTone™, analog 400 Hz, analog 1 kHz
Flash switch port	1s, 2s, 3s
FiberInspector™/Webcam	real time, pause, scale (for fiber), save

File Tools
Profiles	Save, delete, rename, export, import, load
AP authorization	Save, delete, rename, export, import, load
Reports	Save, delete, rename, export, import, view
Screens	Save, delete, rename, export, import, view

Certifications and Compliance
	Conformite Europeene. Conforms to the requirements of the European Union and the European Free Trade Association (EFTA).
	Listed by the Canadian Standards Association.
	Conforms to relevant Australian standards.