EtherScope Network Assistant Series II

General Specifications
Weight, with battery	0.86 kg (1.9 lb)
Dimensions	19.1 x 15.2 x 4.4 cm (7.5 x 6.0 x 1.75 in)
Display	LCD touch screen, 640 x 480 pixels, TFT (active) color panel, touch pad
LED indicators	6 (including power LED)
Carrying Case	Rugged carrying case for mainframe and standard accessories

Power
Battery	Lithium Ion 7.2V DC (nominal), 4.2Ah, removable/rechargeable
Battery life	4 hour typical, 10 hour in standby mode
External AC adapter/battery charger	AC input: 90 to 264 V ac, 48 to 62 Hz; 1.5 A
	DC output: 15 V dc, 1.2 A (isolated output)
Auto Charger	12V “cigarette lighter” charger with 6 foot (1.8 m) fully extended coiled cord and LED power indication

Ports
Communication and accessory ports	1 USB (supports out-of-band NIC for remote control), 1 PCMCIA/Cardbus (PC Card type II), 1 SFP cage, 1 CompactFlash (Card Type I/II), 1 DB-9 serial, headphone jack, microphone jack, Kensington lock receptacle
RJ-45 / Copper Port	RJ-45 10/100/1000BASE-T Ethernet. LAN option must be enabled to activate the copper port.
Fiber Port	Small Form-factor Pluggable (SFP) in accordance with MSA. Fiber option must be enabled to activate the fiber port.
Supported SFP Modules	1000BASE- LX, SX, ZX, BX, 100BASEFX. Transceiver models MS-SX, MS-LX, and MS-100FX require EtherScope software version 4.0 or higher.
SFP Connector	Duplex LC

Environmental and safety
Operating Temperature	0° to +50°C (32° to 122°F) with up to 95% relative humidity
Battery Charging	10° to +40°C (50° to 104°F) with up to 95% relative humidity
Temperature
Storage temperature	-20° to +60°C (-4° to 140°F)
Shock and vibration	Meets requirements of MIL-PRF-28800F for Class 3 equipment
Safety	CSA Canada and United States, CE, FCC Part 15 Class A, C-TICK N10140; UL and CSA approvals for universal AC adapter. EMC Complies with EN61326, Class A, Criteria C

Copper media
Cable types	Unshielded twisted pair LAN cables (100 and 120 Ohm UTP)
	Foil-screened twisted pair LAN cables (100 and 120 Ohm ScTP)
Cable length	1 to 305 m (3 to 1000 ft), accuracy dependent upon the cable type selected
Length resolution	± [5% of reading + 1 m (3 ft)], with open, shorted, with wire map adapter, or terminated with reflection = 20%
Receive level	100 to 5000 mVp-p
Datalink signal	500 to 4000 mVp-p
Measuring terminated cables	The Cable Verification feature tests the individual twisted-pairs of a cable that are terminated into most equipment vendor's Ethernet ports such as on a hub, switch or NIC. All cable tests other than WireView wire map and office locator ID are operational in the presence of datalink signal.
Wiremapper/office locator compatibility	Detects combinations of shorts, opens, and connector miswires. Compatible with Fluke Networks WireView wire map adapter/office locator.
Fault tolerance	The RJ-45 Ethernet connection on the analyzer is designed to withstand a maximum of 100 volts.

Fiber optic power measurements
Receive Input Power, Transmit Output Power, Temperature, Voltage, TX Bias Current	Real time access to digital diagnostic monitoring of SFP operating parameters in accordance with the SFP Multi Source Agreement (MSA) and SFF-8472.

ProVision™ Tests
Compatible remote devices	EtherScope, MetroScope, LinkRunner PRO/Duo with reflector, layer 1 loopback, 802.3ah device Note: An EtherScope with v5 software or a LinkRunner Duo is required for 16K jumbo frame testing.
Test Configuration	Each test may be made up of an unlimited number of suites which run sequentially. Each suite may measure a maximum of eight streams total (including upstream and downstream) from one to four peer devices or a maximum of four streams (roundtrip) from one to four reflectors.
Test Duration	Each suite can run for any length of time from 1s to 24h. Suites may be run sequentially for virtually unlimited test lengths.
Tests	Throughput, Latency, Jitter, Loss/BERT, measured in parallel
Application port	User defined, per stream
Frame content	All 0s, all 1s, alternating 1s and 0s, Pseudo Random Bit Sequence (PRBS), Incrementing Byte, HFPAT, LFPAT, MFPAT, LCRPAT, SCRPAT
Frame size	48, 64, 128, 256, 512, 1024, 1280, 1518, 2024, 9000, RFC-2544 sweep, Jumbo sweep, or user-defined including jumbo sizes up to 16000
Rate (bps)	Up to 1000 Mbps (selectable per stream)
802.1Q settings	VLAN Id, QoS with CoS and ToS , QinQ VLAN Id, priority for each individual stream or all streams. Programmable TPID, DEI, CFI and VID for all streams
IP TOS settings	IP Precedence/TOS parameter, DiffServe Code Point
Pass/Fail Limits	Throughput (separate upstream and downstream), Latency, Jitter, Loss/BERT
Summary Display	Summary matrix of all streams and all measurements; IP/Mac addresses, VLANPriority/TOS, status,Tx and Rx rates in bps and fps, frames sent and lost, loss ratio, errored intervals; current, average, maximum latency and jitter.
Detailed Display	Individual measurements may be shown in tabular (by frame size), graphical (by frame size) or trending (by current interfal or total test duration for all frame sizes).
Frame Loss Statistics	Total, current, and maximum for: frames sent and lost, loss ratio, BER, errored intervals, severely errored intervals
Data Export	Throughput, Frames Sent/Received, Loss, Delay and Jitter test results for each stream are time stamped and saved to the CD card once per measurement interval for the duration of the test.

RFC 2544 Performance Tests
Compatible remote devices	EtherScope, MetroScope, LinkRunner PRO/Duo with reflector, layer 1 loopback, 802.3ah device
RFC-2544 Compliant Tests	Throughput, Latency, Frame Loss, Back-to-Back
Additional Performance Tests	Loss Rate, Jitter, FrameBERT
Frame content	All 0s, all 1s, alternating 1s and 0s, Pseudo Random Bit Sequence (PRBS), Incrementing Byte, HFPAT, LFPAT, MFPAT, LCRPAT, SCRPAT
Frame size	64, 128, 256, 512, 1024, 1280, 1518, 9000, RFC-2544 sweep, Jumbo sweep, or user-defined including jumbo sizes up to 16000
Application port	User defined
Rate (bps)	Up to 1000 M
802.1Q settings	VLAN Id, priority
IP TOS settings	IP Precedence/TOS parameter, DiffServe Code Point
Throughput settings	Duration, maximum rate, measurement accuracy, pass/fail limits
Latency settings	Duration, rate, iterations, pass/fail limits
Frame loss settings	Duration, rate, step size, pass/fail limits
Frame loss settings	Duration, rate, step size, pass fail
Back to Back settings	Min and Max duration, rate, iterations, pass/fail limits
Loss Rate	Duration, rate, pall/fail limits
Jitter Settings	Duration, rate, pass/fail limits
FrameBERT Settings	Duration, rate, pass/fail limits

Server Response Tool
TCP Port Response	DNS Name, IP address, port name, port number, port responsiveness
TCP Trace Route	Hop Count, router name, IP address, average RTT and percentage of total RTT

Internetwork Throughput Option
Compatible remote device	EtherScope, MetroScope, LinkRunner PRO/Duo with reflector option, OptiView v3 Integrated Network Analyzer, OneTouch Series II
Frame content	All 0s, all 1s, alternating 1s and 0s, Pseudo Random Bit Sequence (PRBS)
Frame size	64, 128, 256, 512, 1024, 1280, 1518, sweep of all sizes
Rate (bps)	12336 to 1000 M
Duration(s)	1 to 64,800 (18hr)
Results	Frames sent, received, rate and percent loss for both upstream and downstream directions
Results format	Tabular, graphical, xml-based report

Traffic generator
Traffic type	Broadcast, multicast or unicast, FCS errors
Frame type	Layer 1 FLUKE, Layer 2 FLUKE, Layer 3 FLUKE, Benign Ethernet, Benign LLC, NetBEUI, Benign IP, IP/ICMP Echo, IP/UDP Echo, IP/UDP Discard, IP/UDP Chargen, IP/UDP NFS, IP/UDP NetBIOS
Frame size	48, 64, 128, 256, 512, 1024, 1280, 1518, 9000, user defined up to 16000B
Rate	Utilization (%): >0 – 100, Frames/second: 1 – 1488095
Duration	Seconds: 1 – continuous, Frames: 1 – continuous

Service Performance Tool
Category of devices tested	DHCP Servers, DNS Servers, E-mail Servers (SMTP, POP3), FTP Servers, NT File Servers, Web Servers, WINS Servers, User-Defined Servers
Test controls	Iterations, interval
Add device by	IP address or host name (except Web Server where URL added)
DHCP Server pass/fail criteria	Ping response time, server response time
DHCP Server BOOTP parameters (optional)	Subnet mask, domain server, WINS server, NetBIOS scope, POP3 server, router/default gateway, client DNS domain, NetBIOS node type, SMTP server, web server
DNS Server pass/fail criteria	Ping response time, server response time
E-mail Server pass/fail criteria	Ping response time, SMTP SYN/ACK response time, SMTP response time, POP3 SYN/ACK response time, POP3 response time
E-mail Server operation modes	Connect only, log in only, send/receive
FTP Server pass/fail criteria	Ping response time, SYN/ACK response time, connect time, disconnect time, delete file time, write rate, read rate
FTP Server operation modes	Server response, read, write/read/delete
NT File Server pass/fail criteria	Ping response time, SYN/ACK response time, connect time, disconnect time, delete file time, write rate, read rate
NT File Server operation modes	Server response, read, write/read/delete
Web Servers pass/fail criteria	Web Server name lookup time, ping response time, SYN/ACK response time, first reply time, receive time, receive rate
WINS Servers pass/fail criteria	Ping response time, server response time
User-Defined Servers pass/fail criteria	Ping response time, SYN/ACK response time
Results format	Tabular, graphical, xml-based report

802.3ah Client
Functions	Remote device discovery, loop-up with 1s keep-alive, loop down. May be run in background while other MS functions are active.
Display	Loopback capability of remote, OAM status OAM mode link status, maximum OAM size, remote state

IPTV Tests
Configuration	Multicast Group IP, Port Number, join, leave, RTSP URL, setup, play, pause, teardown
Results	IGMP Latency, Total Packets Sent, Connected Time, Received Packet Rate, RFC-4445 MDI Delay Factor and Media Loss Rate for MPEG-2 streams

Instrument Settings
TCP/IP	DHCP, static
Management TCP/IP	DHCP, static (management using USB Ethernet adapter purchased separately)
802.1Q	LAN: S-VLAN, C-VLAN, TPID, Priority, DEI, VID
IP Type Of Service (TOS)	LAN: IP precedence, DSCP
Security	LAN: 802.1X WLAN: 802.1X, WEP, WPA PSK, 802.11i PSK, WPA, WPA2
802.1X EAP type	TLS, GTC, MD5, MSCHAPV5, PEAP GTC, PEAP MD5, PEAP MS-CHAP-V2, PEAP TLS, TTLS PAP, TTLS CHAP, TTLS MSCHAP, TTLS MSCHAP-V2, TTLS EAP-MD5, TTLS EAP-GTC, TTLS-EAP-MSCHAP-V2, TTLS EAP-TLS, EAP FAST
Active tests	LAN: User defined tests to appear on detailed view home page and drop down navigation
SNMP	LAN: v1, v2, v3 (with SHA and MD5 authentication, DES encryption)
Ethernet	LAN: Auto-negotiation, force setting, MAC address
Instrument security	Password control for remote UI, ProVision and RFC2544 tests, SNMP settings, and 802.1X
General	Enable as remote, advanced remote NAT/Proxy settings, user preferences
Group names	WLAN: assign alias to one or more devices

Tools
LAN	Ping, trace route, trace switch route, traffic generator, web browser, telnet, SSH telnet, terminal, FTP, TFTP, xDP port reporter (CDP, LLDP), Service Performance Tool, Remove CF Card, Lock Screen, Report
WLAN	Ping, trace route, web browser, telnet, SSH telnet, terminal, FTP, TFTP, wireless throughput, report

Wireless LAN Adapter Card
Specification compliance	IEEE 802.11a, 11b, 11g
Certifications	FCC part 15, Telec, CTICK, ETSI, EN301893, EN60950
Interoperability	WECA Compliant
Interface	32-bit Cardbus
Outdoor operating range	Up to 515 m (1690 ft)
Indoor operating range	Up to 85 m (279 ft)
Data rate	802.11a: up to 54 Mbps, 802.11b: up to 11 Mbps, 802.11g: up to 54 Mbps
Output power	18 dBm peak power
Infrastructure mode	BSS
External antenna connector jack	Hirose MS-147

Wireless LAN Directional Antenna
Frequency range	2.4 – 2.5 and 4.9 - 5.9 GHz
Minimum gain	5.0 dBi in the 2.4 GHz band and 7.0 dBi in the 5 GHz band
External antenna connector plug	Hirose MS-147